Skip to main content
AC SOFT START — GLENDALE, AZ

AC SOFT START
GLENDALE, AZ

Bradford installs MicroAir EasyStart Flex soft starts in Glendale, AZ. Reduces compressor startup current by 70%, extends compressor life, and enables generator compatibility. Call (623) 624-6246 for pricing. AZ ROC #353859.

Glendale\'s older neighborhoods (Maryvale, Thunderbird) have aging AC systems that benefit most from soft starts. A soft start is the most cost-effective way to protect your system.

MicroAir EasyStart Flex Call for Pricing 1–2 Hour Install Generator Compatible AZ ROC #353859 Same-Day Available

Open 7 days a week, 7AM–7PM · Same-day installation available in Glendale

Limited Time Offer

$59 A/C TUNE-UP & INSPECTION

Per unit · Full 20-point inspection · Serving Glendale

Or request a quote for any other service below

Same-day slots available — Ken responds within 30 min
★★★★★

Join 285+ satisfied customers — no spam, no pressure.

By submitting, you authorize Bradford Heating & Cooling to contact you by phone, text, or email about your request. Reply STOP to opt out of texts. Message & data rates may apply.

4.8· 276 Google Reviews AZ ROC #353859 70% Less Startup Current 1–2 Hour Install Glendale, AZ

WHY GLENDALE HOMEOWNERS INSTALL SOFT STARTS

Glendale\'s older neighborhoods (Maryvale, Thunderbird) have aging AC systems that benefit most from soft starts. A soft start is the most cost-effective protection available.

70% Less Startup Current

Reduces compressor startup surge from 45–65A down to 15–25A. Less stress on the compressor, capacitor, and your home's electrical system.

Extends Compressor Life

In Glendale's extreme heat, your compressor starts thousands of times per year. Soft start reduces that startup stress — translating to years of additional compressor life. This is especially important for aging systems in Glendale's older neighborhoods like Maryvale and Thunderbird.

Generator Compatible

Most portable generators can't handle AC startup surge. A soft start reduces that surge by 70%, allowing many 5,000–8,000W generators to run your central AC.

Brownout Protection

APS/SRP voltage sags during peak summer demand. Soft start reduces startup current regardless of incoming voltage — protecting your compressor during brownout conditions.

Fewer Capacitor Replacements

Startup surges are the #1 cause of capacitor failure. Soft start reduces those surges, extending capacitor life and reducing the most common summer service call in Glendale.

1–2 Hour Installation

Bradford installs the MicroAir EasyStart Flex in 1–2 hours. No refrigerant work, no permits required. Same-day installation available in Glendale.

Did You Know? Your AC Produces 5–20 Gallons of Water Per Day

In Glendale\'s summer humidity, your AC\'s condensate drain removes significant water from your home. If not properly maintained, this can lead to issues, especially in older homes found in neighborhoods like Maryvale and Thunderbird. Bradford offers comprehensive AC repair services to address these and other common AC problems.

Learn about AC Repair in Glendale →
⚡ INTERNET EXCLUSIVE BONUS

Book online and get 2 FREE bonuses with your soft start installation:

HVAC Surge Protector Included (a $370 value)
🔧 AC Tune-Up Included ($299 value)

Mention this page when you call or book online. Valid with soft start installation only.

SOFT START INSTALLATION PRICING IN GLENDALE, AZ

Call for Pricing
MicroAir EasyStart Flex — Installed
  • MicroAir EasyStart Flex (all major AC brands)
  • 1–2 hour installation
  • Extends compressor life
  • Reduces startup current 70%
  • Generator compatible
  • AZ ROC #353859
Schedule: (623) 624-6246

Price includes parts and labor. Bradford provides a written, itemized quote before any work begins. No surprise charges.

WHAT GLENDALE HOMEOWNERS SAY

\"Ken has been great to work with. We first contacted him for our maintenance service of our 20+ year old system. When the time came he made the process of purchasing and installing a new HVAC system seamless. Installers were on time, polite, clean and efficient.\"

Kelly Rojo

\"Ken and Kyle were prompt and very professional. Within 10 minutes they diagnosed the issue and explained the system thoroughly and answered all my questions.\"

Ed S

AC SOFT START FAQ — GLENDALE, AZ

Common questions about AC soft start installation in Glendale, AZ

An AC soft start (also called a hard start kit or compressor saver) is a small electronic device installed on your AC's compressor that reduces the electrical current surge at startup by up to 70%. In Glendale, AZ — especially in older neighborhoods like Maryvale and Thunderbird — your AC compressor starts under significant load. That startup surge stresses the compressor, capacitor, and electrical system every single time. A soft start like the MicroAir EasyStart Flex ramps the compressor up gradually, reducing startup current from 45–65 amps down to 15–25 amps. Bradford installs soft starts on all major AC brands in Glendale.
Bradford installs MicroAir EasyStart Flex soft starts in Glendale, AZ. Call (623) 624-6246 for current pricing — Bradford provides a written, itemized quote before any work begins. The installation takes 1–2 hours and requires no refrigerant work. Most Glendale homeowners see the soft start pay for itself within 2–3 years through reduced capacitor replacements and extended compressor life.
Yes. In Glendale, AZ, your AC runs 9–10 months per year — far more than in cooler climates. That means your compressor starts and stops thousands of times per year. Each startup surge stresses the compressor windings and bearings. A soft start reduces that startup stress by up to 70%, which translates directly to longer compressor life. Bradford recommends soft starts on any Glendale AC system over 8 years old as a cost-effective alternative to premature compressor replacement ($1,200–$2,500). This is particularly beneficial for aging systems in areas like Maryvale and Thunderbird.
Yes — this is one of the most popular reasons Glendale homeowners install soft starts. Most portable generators (5,000–8,000 watts) cannot handle the startup surge of a 3–5 ton AC compressor. A soft start reduces that surge by up to 70%, allowing many portable generators to successfully start and run a central AC system. Bradford can assess your generator capacity and recommend the right soft start for your Glendale home.
Yes. APS and SRP occasionally experience voltage sags during Glendale's peak summer demand (July–August). Low voltage causes compressors to draw even higher startup current, which can damage or burn out the compressor. A soft start reduces startup current regardless of incoming voltage, providing meaningful protection during brownout conditions. Bradford recommends pairing a soft start with a hard start capacitor for maximum protection.
Bradford's honest answer: it depends. If your Glendale AC compressor is healthy and the system is otherwise in good condition, a soft start is an excellent investment to extend compressor life another 3–5 years. If your compressor is already showing signs of failure (hard starting, tripping breakers, warm air), a soft start may not be enough — Bradford will diagnose the compressor and give you an honest comparison of soft start vs. compressor replacement vs. full system replacement. Call (623) 624-6246 for current pricing.
Yes. Bradford handles all aspects of AC repair and maintenance in Glendale, including common issues in zip codes like 85301, 85302, and 85304. We serve neighborhoods such as Arrowhead Ranch, Westgate, and Thunderbird. Whether it's a refrigerant leak, a faulty capacitor, or a complete system breakdown, our certified technicians are ready to provide prompt and reliable service. Call us for any AC repair needs in Glendale.

PROTECT YOUR COMPRESSOR THIS SUMMER

MicroAir EasyStart Flex · Call (623) 624-6246 for pricing · 1–2 hour install · Generator compatible · AZ ROC #353859.

Serving Glendale, Peoria, Sun City West, Goodyear, Buckeye, and all West Valley communities.

Surprise Peoria Sun City West Goodyear Buckeye Glendale

THE STARTUP CURRENT PROBLEM

Every time your AC starts in Glendale's 110°F heat, it draws a massive current spike — stressing your compressor, capacitor, and electrical system. Bradford installs the MicroAir EasyStart Flex to eliminate that spike.

STARTUP CURRENT COMPARISON — TYPICAL 3-TON HOME AC UNIT

Current (Amps) vs. Time (milliseconds) at startup

Data approximated from MicroAir EasyStart Flex product specifications. Actual values vary by system size and conditions.

Up to 75%
Reduction in startup current
From ~65–80 amps down to ~20 amps at startup
🔧
2–5×
Longer compressor life
Less startup stress = fewer breakdowns and replacements
💡
Eliminates
Light flickering at startup
No more lights dimming when your AC kicks on
🔇
Quieter
AC startup noise
Gradual ramp-up eliminates the loud startup bang
🔋
Generator
Compatible
Run your AC on a smaller generator during outages
🛡️
Protects
Capacitor & electrical system
Reduces stress on capacitor, contactor, and wiring
CALL (623) 624-6246 — ADD SOFT START TO YOUR AC

Bradford installs MicroAir EasyStart Flex · 1–2 hour installation · All major AC brands

💡 THE COMPLETE PROTECTION PACKAGE

DON'T JUST INSTALL A SOFT START —
PROTECT THE WHOLE COMPRESSOR

When Bradford comes out to install your soft start, we inspect the full system. Here's what we typically find — and why the complete package makes sense.

1. MicroAir EasyStart Flex

Reduces startup current by up to 75%. Extends compressor life 3–5 years. Enables generator operation. The foundation of the package.

🔧

2. Amrad Turbo 200 Capacitor

Run capacitors degrade in Arizona heat. The Turbo 200 is a premium universal cap rated for extreme temps — far more reliable than the OEM spec cap that came with your unit.

⚠️ Most Glendale units we inspect have degraded caps

🛡️

3. RectorSeal RSH-50 Surge Protector

Monsoon lightning and grid switching events destroy control boards. The RSH-50 is a hardwired whole-system surge protector — the last line of defense for your investment.

THE MATH — WHY THE BUNDLE MAKES SENSE

Without the bundle

$1,500–$2,000

Compressor replacement cost when it fails early from hard-start stress + degraded cap + lightning surge

With the complete package

~$600–$800

Soft start + Turbo 200 cap + surge protector — installed by Bradford with a written quote before any work begins

A 3:1 return if it prevents even one compressor replacement. Most Glendale homeowners consider it a no-brainer.

"When I come out for a soft start install, I inspect both the run capacitor and the electrical connections. If I find a degraded cap — which I do on most Glendale units that are 7+ years old — I'll tell you before I start. I'd rather quote the complete job upfront than have you call me back in 6 months for a capacitor replacement."

— Ken Bradford Baker, Owner · AZ ROC# 353859

📞 CALL (623) 624-6246 — GET A WRITTEN QUOTE

Written quote before any work begins · 10% senior & veteran discount available · Same-day scheduling available

⚡ BETTER TOGETHER

SOFT START + SURGE PROTECTOR = COMPLETE AC PROTECTION

A soft start and a surge protector solve different problems. One manages how your AC starts. The other shields it from external voltage threats. Neither replaces the other — together they provide complete protection for Arizona's extreme climate.

AC SOFT START

Protects against internal startup stress

YOU'RE HERE
  • Reduces 80A startup spike to ~20A
  • Prevents breaker trips at startup
  • Enables generator/solar compatibility
  • Eliminates light flickering
  • Extends compressor life 2–5×
  • Quieter AC startup

HVAC SURGE PROTECTOR

Protects against external voltage spikes

  • Protects against lightning strikes
  • Shields control boards from grid spikes
  • Guards against post-outage voltage surges
  • Protects from utility switching events
  • Prevents $1,500–$4,000 control board damage
  • Bradford installs — not DIY
Learn about HVAC Surge Protectors →

WHAT EACH DEVICE PROTECTS AGAINST

ProtectionSoft StartSurge Protector
Reduces startup current (80A → 20A)
Prevents breaker trips at startup
Enables generator/solar compatibility
Eliminates light flickering at startup
Extends compressor life
Quieter AC startup
Protects against lightning strikes
Protects control boards from grid spikes
Guards against post-outage voltage surges
Protects from utility grid switching events

Bradford Recommends Both

INSTALL BOTH — COMPLETE PROTECTION FOR YOUR AC

Bradford installs both the AC soft start (MicroAir EasyStart Flex) and a professional-grade HVAC surge protector in a single visit. Ask about bundle pricing when you call.

Why Bradford for soft start AC installation in Glendale, AZ?

Glendale's older neighborhoods often have aging R-22 systems that need specialist attention. Bradford's technicians are R-22 certified and can service or replace any system brand. When your AC fails at 108°F+ in the Arizona summer, you need a technician who can respond the same day — not schedule you a week out. Bradford's West Valley team is based in Surprise, just minutes from Glendale, and we guarantee same-day response 7 days a week.

Unlike national chains that charge a $75–$125 service call fee before they even look at your system, Bradford charges $0 service call fee with any approved repair. Our technicians are NATE-certified, background-checked, and use only OEM manufacturer parts — never aftermarket substitutes that void your warranty.

Neighborhoods We Serve in Glendale

Bradford serves every neighborhood in Glendale, including: Arrowhead Ranch, Arrowhead Lakes, Westgate, Thunderbird Farms, Bellair. If you're in Glendale or anywhere in the West Valley, we can be at your door the same day you call.

4.8★ Google Rating
285+ verified reviews
Same-Day Service
7 days a week
$0 Service Call
With approved repair
AZ ROC# 353859
Licensed & insured
$59/Unit A/C Tune-Up & Inspection — Limited Time