Furnace Repair
Glendale, AZ
Bradford Heating & Cooling serves all of Glendale — Camelback Ranch, Sierra Verde, Westgate, Westgate, Camelback Ranch, Sierra Verde, and every neighborhood in between. Same-day furnace repair, $75/visit service call fee with approved repair. AZ ROC #353859.
Recent Work in Glendale
Bradford's most recent HVAC jobs in the Glendale area
Trane 18 SEER2 Variable-Speed
4-ton split system, attic install, new return plenum
$59 A/C Tune-Up
20-point inspection, coil cleaning, refrigerant check
Trane 20 SEER2 TruComfort
5-ton variable-speed, zoned system, 3 zones
Whole-System Surge Protection
Installed on condenser, protects against monsoon voltage spikes
Bradford serves Glendale and all West Valley cities — same-day service available
$59 A/C TUNE-UP & INSPECTION
Per unit · Full 20-point inspection · Serving Glendale, AZ
Or request a quote for any other service below
Recent Work in Glendale
Bradford's most recent HVAC jobs in the Glendale area
Trane 18 SEER2 Variable-Speed
4-ton split system, attic install, new return plenum
$59 A/C Tune-Up
20-point inspection, coil cleaning, refrigerant check
Trane 20 SEER2 TruComfort
5-ton variable-speed, zoned system, 3 zones
Whole-System Surge Protection
Installed on condenser, protects against monsoon voltage spikes
Bradford serves Glendale and all West Valley cities — same-day service available
$59 A/C TUNE-UP & INSPECTION
Per unit · Full 20-point inspection · Serving Glendale, AZ
Or request a quote for any other service below
Common Furnace Repairs in Glendale, AZ
Glendale's older neighborhoods — many with 15–20 year old furnaces — see a predictable set of heating failures each winter. Bradford handles all of them with upfront flat-rate pricing.
Igniter Replacement
$196Typical time: 0.5 hr
The most common furnace repair in Arizona. Bradford stocks OEM igniters for all major brands — most jobs completed in under 30 minutes.
Heat Exchanger Inspection
$95–$150Typical time: 1 hr
A cracked heat exchanger can allow carbon monoxide into your home. Bradford performs thorough visual and combustion analysis inspections.
Blower Motor Replacement
$300–$600Typical time: 1.5 hrs
A failing blower motor reduces airflow and causes overheating. OEM replacement motors with upfront flat-rate quote before work begins.
Gas Valve Replacement
$250–$500Typical time: 1 hr
A faulty gas valve prevents the furnace from receiving fuel. Bradford technicians are licensed for gas appliance work.
Flame Sensor Cleaning / Replacement
$160Typical time: 0.5 hr
A dirty flame sensor causes short-cycling. Cleaning often resolves the issue; replacement is inexpensive when needed.
Thermostat Replacement
Quoted on-siteTypical time: 1 hr
A faulty thermostat causes erratic cycling or complete system failure. Includes installation and full programming.
Furnace Repair in Glendale, AZ
Glendale is one of the largest cities in the West Valley, with neighborhoods ranging from the master-planned communities of Arrowhead Ranch and Westgate in the north to the established neighborhoods near 83rd Avenue and Glendale Avenue in the south. Bradford Heating & Cooling serves all of Glendale with same-day furnace repair and heating service.
Many Glendale homes were built in the 1990s and 2000s and have furnaces approaching or exceeding 15 years of age. These systems are prone to igniter failures, heat exchanger cracks, and blower motor wear — all of which Bradford handles with OEM parts and upfront flat-rate pricing. If your furnace is over 15 years old and requires a major repair, Bradford will give you an honest assessment of whether repair or replacement makes more financial sense.
Bradford's $75/visit service call fee with any approved repair means there is no charge for the diagnostic visit when you move forward with the fix. Call (623) 624-6246 for same-day furnace repair in Glendale.
Furnace Repair FAQ — Glendale, AZ
BRADFORD SERVES GLENDALE & THE WEST VALLEY
Based in Surprise, AZ — Bradford reaches Glendale and all surrounding West Valley communities with fast response times.
Shaded areas show Bradford's service zip codes · Glendale marker highlighted in red
Furnace Not Working in Glendale? Call Bradford.
Same-day service. $75/visit service call fee with approved repair. AZ ROC #353859.
STAY CONNECTED WITH BRADFORD
Follow us, share the love, and help your neighbors find honest HVAC service.
Furnace Repair in Glendale, AZ
Arizona winters are mild, but West Valley nights still drop into the 30s and 40s, and a failed furnace or heat pump in heating mode is no fun. Bradford repairs gas furnaces and heat pumps alike — igniters, flame sensors, blower motors, reversing valves, and control boards. We diagnose the issue and quote a flat rate before starting.
Glendale's older neighborhoods often have aging R-22 systems that need specialist attention. Bradford's technicians are R-22 certified and can service or replace any system brand. When you need furnace repair at 108°F+ in the Arizona summer, Bradford's West Valley team is based in Surprise, just minutes from Glendale, with same-day response 7 days a week and $0 service call with approved repair.
Signs You Need Furnace Repair in Glendale
- ✓Furnace blowing cold air in heating mode
- ✓Heater won't ignite or keeps shutting off
- ✓Yellow or flickering burner flame (call immediately)
- ✓Loud bangs or rumbles on startup
- ✓Heat pump stuck in defrost or not heating
Glendale Neighborhoods We Serve
Bradford provides furnace repair to every neighborhood in Glendale, including: Arrowhead Ranch, Arrowhead Lakes, Westgate, Thunderbird Farms, Bellair. If you're anywhere in Glendale or the West Valley, we can be at your door the same day you call (623) 624-6246.
Frequently Asked Questions
How much does furnace repair cost in Arizona in Glendale?+
Most furnace repairs run $150–$600 depending on the part. An igniter or flame sensor is on the lower end; a blower motor or control board is higher. Bradford quotes a flat rate up front, and the service call is $0 with any approved repair.
BRADFORD SERVES ALL OF GLENDALE, AZ
Bradford Heating & Cooling provides furnace repair throughout Glendale, AZ — including Arrowhead Ranch, Bellair, Westgate, and Peoria Avenue corridor (ZIP codes 85301, 85302, 85308, 85310). Bradford is locally owned by Ken Bradford Baker, licensed AZ ROC# 353859, with 4.8 stars from 285+ verified Google reviews. Bradford provides same-day furnace repair throughout the West Valley — 7 days a week, 7AM-7PM. Bradford charges $0 service call with approved repair.
WHY GLENDALE HOMEOWNERS CHOOSE BRADFORD
- ✓ Same-day service — Bradford is based in Surprise
- ✓ $0 service call with any approved repair
- ✓ Authorized Trane & RunTru dealer
- ✓ 4.8★ Google rating · 285+ verified reviews
- ✓ Bradford does not accept home warranty calls
When winter temperatures drop across Glendale, a failing heating system can quickly make your home uncomfortable, especially in older properties near Bellair or newer builds in Arrowhead Ranch. Bradford Heating & Cooling provides expert furnace repair throughout the 85301–85310 ZIP codes, addressing common cold-weather issues like cracked heat exchangers, faulty igniters, and malfunctioning heat-pump reversing valves. As a trusted West Valley contractor based in Surprise (AZ ROC# 353859), we offer same-day response and a $0 service call with repair to restore your heat promptly. Our experienced technicians carry the right parts to ensure your family stays warm during those chilly desert nights.
Is it time for a new system?
If your AC is 10+ years old or repairs are adding up, a new system may cost less than you think.
Hi, I'm Emily!
I answer every call at Bradford — 7 days a week. Ken is available upon request. I'll have you booked in minutes.
(623) 624-6246